View MAMXSS0013_4562726.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MAMXSS0013
Low Cost MMIC Mixer 1400 - 2100 MHz
Features
* * * * * * * * * * +12 dBm Input Power @ 1 dB Compression High Isolation, 28 dB LO to RF +3 to +8 dBm LO Drive Level DC - 500 MHz 3 dB IF Bandwidth Does not require DC bias Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MD54-0006 Rev. V2
Functional Block Diagram
Description
M/A-COM's MAMXSS0013 is a passive mixer that achieves the performance of a double balanced diode mixer in a lead-free SOT-25 package. The MAMXSS0013 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/ down conversion, modulation and demodulation in receivers and transmitters for base station and portable systems. The MAMXSS0013 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +3 dBm to +8 dBm. The LO port may be externally tuned for operation in various frequency bands. M/A-COM's MAMXSS0013 is fabricated using a mature 0.5 micron gate length GaAs MESFET process. The process features full passivation for increased performance and reliability. The MAMXSS0013 is 100% RF tested to ensure performance specification compliance.
Pin Configuration
Pin No.
1 2 3 4 5
Pin Name
LO Port Ground Ground RF Port IF Port
Description
LO Input Ground Ground RF Input IF Output
External Circuitry Parts List 2,3
LO Frequency Part
R1 L1 C1
1500 MHz
470 6.8 nH 3.3 pF
1710 MHz
470 4.7 nH 2.2 pF
2300 MHz
820 2.7 nH 2.2 pF
Ordering Information1
Part Number
MAMXSS0013 MAMXSS0013TR-3000 MAMX-000013-001SMB MAMX-000013-002SMB MAMX-000013-003SMB
Package
Bulk Packaging 3000 piece reel Sample Board 1500 MHz Sample Board 1710 MHz Sample Board 2300 MHz
2. The external LO matching network allows tuning from 1400 MHz to 2300 MHz. The networks given above are intended to serve as guidelines for matching in different bands. 3. All off-chip components are low-cost surface mount components obtainable from multiple sources (0.060 in. x 0.030 in. or 0.080 in. x 0.050 in).
1. Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMXSS0013
Low Cost MMIC Mixer 1400 - 2100 MHz
Electrical Specifications4: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (+5 dBm), IF = 140 MHz, TA = 25C
Parameter
Conversion Loss Isolation LO to RF LO to IF RF to IF RF Port LO Port 3 IF Port LO = +5 dBm, RF Freq: 1850 MHz Two Tones at -10 dBm each, Tone spacing = 100 KHz, IF = 140 MHz
Rev. V2
Test Conditions
Units
dB dB dB dB Ratio Ratio Ratio dBm dBc
Min.
-- -- -- -- -- -- -- -- --
Typ.
8.0 28 15 15 2.0:1 2.0:1 2.0:1 12 55
Max.
9.0 -- -- -- -- -- -- -- --
VSWR Input 1 dB Compression Two-Tone IM Ratio 5
4. With external LO Port matching. See functional block diagram. 5. IMR vs. RF drive can be calculated by the formula: IMR = 40-1.5*Pin.
Absolute Maximum Ratings 6,7
Parameter
RF Input Power LO Drive Power Operating Temperature Storage Temperature
Spurious Table
4x
38.3 27.3 21.4 10.5 9.0 -0.9 1.9 -6.0 X X 41.3 39.9 30.1 30.1 36.1 36.4 0 0 8.1 8.3 45.4 52.5 69.0 70.5 36.0 45.8 44.8 55.5 45.5 54.4 64.7 77.1 43.0 58.8 65.8 75.0 56.1 75.2 56.8 72.3 57.0 78.7 68.3 76.8 64.3 78.0 65.0 78.3 72.9 74.3
Absolute Maximum
+27 dBm +27 dBm -40C to +85C -65C to +150C
Harmonic of LO
3x 2x 1x 0x
6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits.
0x
1x
2x
3x
4x
Harmonic of RF
The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated relative to the IF. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of 0 dBm, the lower number is for -10 dBm. |nFRF - mFLO |, RF = 0 dBm |nFRF - mFLO |, RF = -10 dBm RF Frequency = 1850 MHz LO Frequency = 1710 MHz
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMXSS0013
Low Cost MMIC Mixer 1400 - 2100 MHz
Recommended PCB Configuration
Layout View Cross Section View
Rev. V2
The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.2 mm) yielding a 50 line width of 0.015" (0.38). The recommended metalization is 1 ounce copper.
Lead-Free SOT-25
Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAMXSS0013
Low Cost MMIC Mixer 1400 - 2100 MHz
Typical Performance Curves
* *
Test Conditions for Down Converter Application: RF = 1850 MHz (-10 dBm), IF = 140 MHz, LO = 1710 MHz (+5 dBm). Test Conditions for Up Converter Application: LO = 1710 MHz (+5 dBm), IF = 140 MHz (-10 dBm), RF = 1850 MHz.
Rev. V2
Conversion Loss (Up/Down)
10
VSWR
5.0
4.0
LO RF
9
3.0
8
2.0
7 1700
1800
1900
2000
1.0 1700
1800
1900
2000
RF Frequency (MHz)
RF Frequency (MHz)
Two-Tone IMR
80
Isolation
40
LO TO IF LO TO RF RF TO IF
70
30
60
20
50
10
40 1700
1800
1900
2000
0 1700
1800
1900
2000
RF Frequency (MHz)
RF Frequency (MHz)
Wide*
Test Conditions for Wide-Band Application: RF = -10 dBm, IF = 140 MHz, LO = +11 dBm, LO Port resistively matched. Lower LO drive operation is available for narrow band performance using external reactive matching. The 3 dB IF bandwidth is 500 MHz. IF frequencies above 200 MHz can be optimized for low conversion loss by using external matching components.
Conversion Loss
10
Two-Tone IMR
80
70 9
60 8 50
7 1400
1575
1750
1925
2100
40 1400
1575
1750
1925
2100
4
RF Frequency (MHz)
Frequency (MHz)
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of MAMXSS0013

	To Download MAMXSS0013 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .